Royal Sovereign Alexis 27 Guide D'utilisation page 7

Power Switch (1) - Located on the rear of
the machine. "I" (on) "0" (off). (Fig. 2)
Cross Cutter (2) - Used to cut off the
laminated web. (Fig. 2)
Main Fuse (3) - To cut off the main power
circuit. It can recover by itself.
Feed Guide (4) -The feed guide permits
alignment of the item(s) to be laminated. To
position the adjustable guide, loosen the knob,
slide it to the desired position and tighten the
knob to secure the feed guide in place. (Fig. 3)
Safety Cover (5) - It prevents entanglement
NOTE: If the safety cover is opened, the power
to the motor will turn off.
Film Shaft
The film shaft holds the film supply on the
machine. (Fig. 4)
Film Tension Adjustment - Allows the
operator to increase or decrease film web
tension. clockwise to increase tension and
to decrease tension turn the knob counterclockwise.
(Fig. 5)
②
①
③
7
Alexis 27
Figure 2
⑤
④
Figure 3
Figure 4
Figure 5