Sunny Health & Fitness SF-E902 Manuel Du Propriétaire page 8

We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at
90SUNNY (877-907-8669).
ASSEMBLY INSTRUCTIONS
STEP 1:
Unfolding the Air Walker Trainer
Pull out the large Ball Pin (No. 26), located half-way through
the swing bars, to unlock the swing bars. Pull out the Ball Pin
(No. 43) located in the hinge where the two support tubes meet.
This will unlock the Main Frame (No. 25). Unfold the Main
Frame (No. 25) by pulling apart the support tubes. Reinsert the
Ball Pin (No. 43) into the aligned holes on the hinge to secure
the Main Frame (No. 25). Unfold both pedals to have the
machine fully unfolded.
STEP 2:
Attaching the Support Tube
Insert the Support Tube (No. 11) into the slot located at the top of
the Main Frame (No. 25). Align the holes on the Support Tube
(No. 11) with the holes on the slot. Insert two Allen Screws (No.
16) into each hole and use the Allen Key (No. A) to secure them.
Insert the large Ball Pin (No. 26) into the top hole of the Support
Tube (No. 11) for safe keeping.
support@sunnyhealthfitness.com
7
or 1-877-