Glossary - Campbell Hausfeld NF349099 Instructions D'utilisation

Operating Instructions and Parts Manual
Unpacking
Framing Nailer
Oil Battery
Gas Valves
Cleaning Instructions
Cordless
Framing Nailer
This manual provides an easy and effective
way to clean this tool. Regular cleaning
will maintain reliable operation, extend
part life, and provide maximum nail driving
power.
You will need the following items to
complete this cleaning proceedure:
Allen wrenches
Oil
Degreaser cleaner
The hex key wrenches and lubricating oil
Operating Instructions and Parts Manual provided in the tool case are essential
for the cleaning process. Please locate
Cordless
the hex key wrenches and oil in the case
before beginning this cleaning process.
Framing Nailer
We recommend that an aerosol degreaser
cleaner (sold separately) be used for the
cleaning process. Make sure that the
REGISTER YOUR PRODUCT ONLINE NOW! http://www.chpower.net/reg
degreaser cleaner you have selected to
Description use will not damage rubber. The o-ring
seals of this tool are made of a rubber
Specifications
This gas powered nailer is designed for framing, trusses, sub-floors, sheathing, exterior
compound. Chemical damage to these
decks, and pallet/create assembly. Features include: convenient rear loading magazine
o-rings may result in the tool being Model NF349099
which holds up to 48 nails, tethered no-mar decking tip, quick clear nose, an adjustable
made inoperable. Always follow the
depth of drive mechanism, oil free, in-line magazine, anti-dry fire, adjustable rafter, Requires: Battery Fuel Cell
manufacturer's warnings and instructions
hook, and battery indicator light.
when using a cleaning solution. Fastener Size Range:
Cleaning
2 inches to 3-1/2 inches long
solutions
are flammable and can ignite if 0.113 inch to 0.131 inch
sprayed at a heat source. Never shank diameter
spray any cleaner on this tool
31° to 34°
unless the tool has been allowed to cool
down.
Magazine Capacity:
48 fasteners per load
Weight:
7 lbs. 5 oz. (tool alone)
7 lbs. 10 oz. (with battery and
fuel cell)
Length: 12-1/2 inches
Height: 14-7/8 inches
Cycle Rate:
2 - 3 nails per second
1000 nails per hour
Pressure Range: 70 psi to 120 psi
Battery: Li - ion 7.4 V
Battery Weight: 0.24 lbs.
Battery Charger:
FRANÇAISE: Page 7 Single Phase AC 100 - 240 V
SAVE THESE INSTRUCTIONS
50 - 60 Hz
ESPAÑOL: Página 13
DO NOT DISCARD
Charging Time:
© 2012 Campbell Hausfeld/Scott Fetzer For parts, product & service information IN742800AV 7/12
5 minutes (200 nails)
visit www.chpower.com
Max. charging time 120 minutes
Charging Voltage: DC 7.4 V
Charging Current: DC 1.2 A
Locate model number and date code on
magazine and / or tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
FRANÇAISE: Page 19
SAVE THESE INSTRUCTIONS
ESPAÑOL: Página 37 DO NOT DISCARD Retain these numbers for future reference.
For parts, product & service information
© 2012 Campbell Hausfeld/Scott Fetzer IN742700AV 7/12
visit www.chpower.com
Operating Instructions
and
Cleaning Instructions

Glossary

Become familiar with these terms before operating the unit.
ACTUATE (TOOL) — To cause movement to the tool's component(s) intended to drive the fastener.
ACTUATION SYSTEM — The use of a trigger, work contact element (WCE) and/or other operating control, separately or in
combination or sequence, to actuate the tool.
FASTENERS — The nailer uses fasteners ranging from 2 inches to 3-1/2 inches long, from 0.113 inch to 0.131 inch shank diameter,
and from 30° to 34°.
MAGAZINE — The part of the nailer that holds the Fasteners.
FUEL CELL — A compressed aerosol gas used to power the fastener delivery system of the tool.
BATTERY — The electrical component of the tool that powers the nailer ignition system, fan, and indicating LED light.
BATTERY CHARGER — Supplies charge to the battery for use of the tool.
ANSI Z87 Eye Protection
Allen Wrenches
Battery Charger Base and Adaptor
Carry Case
After unpacking the unit, inspect carefully
for any damage that may have occurred
during transit. Check for loose, missing,
or damaged parts. Make sure to tighten
fittings, bolts, etc., before putting unit into
service. Check to be sure all supplied
accessories are enclosed with the unit. In
case of questions, damaged or missing
parts, please call 1-800-543-6400 for
customer assistance.
CONTENTS
◆
Framing Nailer
◆
Battery
◆
Battery Charger Base and Adaptor
◆
Allen Wrenches
◆
Operating Instructions
◆
Cleaning Instructions
◆
ANSI Z87 eye protection
◆
Oil
◆
Two (2) Replacement Gas Valves
◆
Carry Case
ADDITIONAL ITEMS NOT INCLUDED
◆
Fuel cells
◆
Fasteners
◆
Small tool for clearing jams
◆
Hearing protection and other personal
protective equipment as required
www.chpower.com
NF349099
5