Table Des Matières; Safety Guidelines; Safety Symbols; Important Safety Information - Campbell Hausfeld NF349099 Instructions D'utilisation

Operating Instructions and Parts Manual

Safety Guidelines

This manual contains information
that is very important to know
and understand. This information
is provided for SAFETY and
to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following
symbols.
Danger
indicates an
imminently hazardous situation
which, if not avoided, WILL result in
death or serious injury.
Warning
indicates a
potentially hazardous situation
which, if not avoided, COULD result
in death or serious injury.
Caution
indicates a
potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, may cause damage to
equipment.
NOTE: Information that requires
special attention.

Safety Symbols

The following Safety Symbols
appear throughout this manual to
alert you to important safety hazards
and precautions.
Wear Eye Read Manual
and Mask First
Protection
Risk of Falling Wear Eye
Protection
Risk of Fire Risk of
Explosion
Risk of Hot Risk of Fumes
Parts
2 www.chpower.com
Table of Contents
Safety Guidelines . . . . . . . . . . . . . . . . . 2
Safety Symbols . . . . . . . . . . . . . . . . . . 2
Important Safety Information . . . . . . . . 2
Unpacking . . . . . . . . . . . . . . . . . . . . . . 5
Glossary . . . . . . . . . . . . . . . . . . . . . . . . 5
Getting To Know Your
Cordless Framing Nailer. . . . . . . . . . . . 6
Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . 7
Charging Battery . . . . . . . . . . . . . . . . 7
Fuel Cell Preparation. . . . . . . . . . . . . 7
Tool Preparation . . . . . . . . . . . . . . . . 8
Pre-Operation. . . . . . . . . . . . . . . . . . . . 8
Insert Battery. . . . . . . . . . . . . . . . . . . 8
Insert Fuel Cell . . . . . . . . . . . . . . . . . 8
Pre-Use Test . . . . . . . . . . . . . . . . . . . 9
Loading / Unloading the Tool . . . . . . 9

Important Safety Information

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
This manual contains important safety, operational and maintenance information. If you
have any questions, please call 1-800-543-6400 for customer assistance.
CALIFORNIA PROPOSITION 65
other reproductive harm. Wash hands after handling.
cement, or other masonry. This dust often contains chemicals known to
cause cancer, birth defects, or other reproductive harm. Wear protective
gear.
GENERAL
Risk of
Personal
a. To reduce the risks of electric shock, fire, and injury to persons, read
Injury
all the instructions before using the tool. Failure to follow warnings,
dangers, and cautions could result in DEATH or SERIOUS INJURY.
b. Be thoroughly familiar with the controls and the proper use of the equipment.
Follow all instructions. Contact your Campbell Hausfeld representative if you have
any questions.
Wear Hearing
c. Only persons well acquainted with these rules of safe operation should be allowed to
Protection
use the unit.
labels are located on the nailer magazine and body.
Risk of Shock
distance from the work area in case of accidental discharge of fasteners. Do not point
the tool toward yourself or anyone else whether it contains fasteners or not. Accidental
triggering of the nailer could result in death or serious personal injury.
if any shields or guards are removed or altered. Do not use the nailer as a hammer.
Personal injury or tool damage may occur.
No Smoking
Operation . . . . . . . . . . . . . . . . . . . . . . 10
Lubrication . . . . . . . . . . . . . . . . . . . 10
Firing the Tool . . . . . . . . . . . . . . . . . 10
Adjusting Fastener Depth . . . . . . . . 10
Utility Hook . . . . . . . . . . . . . . . . . . . 10
Maintenance. . . . . . . . . . . . . . . . . . . . 11
Clearing a Jam . . . . . . . . . . . . . . . . 11
Tool Repair and
Replacement Parts . . . . . . . . . . . . . 11
Assembly Procedure for
Seals and Moving Parts . . . . . . . . . 11
Air Filter . . . . . . . . . . . . . . . . . . . . . . 11
Storage . . . . . . . . . . . . . . . . . . . . . . 11
Technical Service . . . . . . . . . . . . . . 11
Troubleshooting Guide. . . . . . . . . . . . 12
Replacement Parts List . . . . . . . . . . . 14
Warranty. . . . . . . . . . . . . . . . . . . . . . . 18
When using tools, basic precautions should always be followed,
including the following:
This product or its power cord may contain chemicals known
to the State of California to cause cancer and birth defects or
You can create dust when you cut, sand, drill or
grind materials such as wood, paint, metal, concrete,
Do not operate or allow anyone else to operate the nailer if any
warnings or warning labels are not legible. Warnings or warning
Always assume the nailer contains fasteners. Respect the tool as a
working implement; no horseplay. Always keep others at a safe
Do not make any modifi cations to the tool without fi rst obtaining
written approval from Campbell Hausfeld. Do not use the nailer
NF349099