Migatronic Basic Adf Welding And Grinding Helmet; General Information; Technical Specifications - Migatronic BASIC ADF Mode D'emploi

Migatronic Basic ADF Welding and Grinding Helmet (ENGLISH)
WARNING
Please read and understand all instructions prior
to using the Migatronic Basic ADF welding and
grinding helmet.

GENERAL INFORMATION

This Migatronic Basic ADF Welding and Grinding
Helmet will not protect against severe impact
hazards, such as explosive devices or corrosive
liquids. Machine guards or eye splash protection
must be used when these hazards are present.
All Migatronic ADF welding filters are suitable for
arc welding or cutting applications.
This unit is suitable for all arc processes such as
MIG, MAG, TIG, SMAW, Plasma Arc and Carbon
Arc.
Use this helmet only for face and eye protection
against harmful rays, sparks and spatter from
Welding, Grinding and Cutting.
The Migatronic Basic ADF helmet is not suitable
for "overhead" welding applications, laser welding,
laser cutting, gas welding and gas cutting.
In the event of electronic failure, the welder
remains protected against UV and IR Radiation
according to Shade 16.

TECHNICAL SPECIFICATIONS

Viewing Area
Cartridge Size
UV/IR Protection
Light State
Dark State
Power Supply
Power On/Off
Switching Time
Dark to Light
Operating Temperature
Storage Temperature
Helmet Material
Total Weight
Minimum Operating Amperage
4
The Migatronic auto darkening filter should always
be used with original Migatronic internal and
external shielding glasses.
The manufacturer is not responsible for any
modifications to the welding filter or use of the filter
in helmets of any other make.
Protection can be seriously impaired if unapproved
modifications are made.
Please dispose of packaging
for the product in a responsible
manner. It is suitable for recycling.
Please help protect the
environment. Take the packaging
to the local waste recovery site and place into
the appropriate recycling bin.
Never dispose of electrical
equipment or batteries in with
your domestic waste. If your
supplier offers disposal facility,
please use it or alternatively use
your local waste recovery site and
dispose in the correct manner. This will allow
the recycling of raw materials and help protect
the environment.
100 x 41mm (3.93" x 1.62")
110 x 90 x 8mm (4.33" x 3.54" x 0.31")
Permanent DIN Shade
DIN 4
DIN 9-13 variable
Solar Cell with Built-in Battery
Fully Automatic
Light to Dark <1/30,000s
0.1 - 1.0s (Internal Variable)
-10 °C to +60 °C
-20 ºC to +70 ºC
High Impact Polyamide (Nylon)
460 g
10 Amps