Items needed to clean backboard:
-
100% cotton soft cloth, (only)
-
Glass Cleaner
Clean backboard using a 100% Cotton soft cloth and glass cleaner. Clean glass as you would household windows. Strong cleansers will damage
backboard and void warranty.
HANGING ON THE RIM WILL VOID YOUR WARRANTY. Rims are not warranted for any defects other than workmanship. Torn back plates,
damaged springs, bent rings, damaged eye bolts, and torn or distorted rim supports result from hanging on the rim and are not warranted.
The goal should not be cranked under 7-1/2' or over 10'. Adjustments of the goal should be done under adult supervision.
When attempting slam dunk activity you should always wear a mouth guard to avoid dental injury.
To ensure ease of operation, lubricate all pivot points at least every 6 months or as needed with a good lubricant such as WD-40.
Inspect your pole periodically, if rust should appear
enamel paint.
Key#
Part #
Description
1
3M-6850-00
4" Square T ube Plug
2
1A-7686-30
Bottom Post
3
8S-6898-30
T op Post
4
901-28
3/8-16 Nylon Lock Nut
5
3M-6883-00
1-1/4" OD Plastic Washer
6
8S-6630-30
Upper Board Arm
7
1B-6483-10
3/8-16 X 7.5" Hex Bolt-Grade 5
8
3M-6269-00
1/4" Spacer
9
3M-6548-00
1 X 2 T ube Plug
10
8S-6657-01
Stop Spacer
11
1A-6331-30
Lower Board Arm
12
NOT USED
13
3M-8941-00
Actuator Cap (With hole)
14
8S-6658-01
Pivot Tube
15
3M-6542-00
Actuator Sleeve
16
4A-6605-00
Actuator
17
4L-7501-00
Height Decal
18
701-50
3/8 STD Washer
19
1B-6486-10
1/2-13 X 1-1/2" Hex Bolt
20
2B-6093-00
1/2 Flat Washer
21
2B-6095-00
1/2-13 Nylon Lock Nut
22
1B-6484-10
3/8-16 X 7" Hex Bolt-Grade 5
23
6A-7404-30
Backboard Assembly-60x33" Glass
24
1B-6195-00
3/8-16 X 2.75" Hex Bolt
GOALIATH CARE INFORMATION
- BACKBOARD -
– MAINTENANCE –
, remove loose paint, sand lightly, primer and paint with exterior flat matte finish
B7005CF REPLACEMENT PARTS LIST
Qty.
1
1
1
14
8
2
2
2
8
2
1
1
1
1
1
1
20
1
2
1
2
1
4
– RIM –
– RUST –
Key#
Part #
25
1B-6485-10
26
2B-6114-00
27
Not Used
28
6A-6374-01
29
Not Used
30
2S-6795-01
31
Not Used
32
2S-6427-01
33
1B-6788-00
34
3M-9040-00
35
2B-6097-00
36
2B-6099-00
37
2B-6098-01
38
2S-6453-00
39
2B-6112-00
40
1S-6167-00
41
7B-6255-00
42
4A-6606-00
43
2L-7638-01
44
3M-6580-00
45
3M-6581-00
46
Not Used
47
3F-6010-00
48
3M-8960-00
49
1B-6782-00
50
Not Used
77
1B-6821-00
21
Description
3/8-16 X 5" Hex Bolt
3/8 Flat Washer
Goal Assembly
Post Ear
Rim Cover Plate
#8 x 1/2 Thread Forming Scr.
5/8 Thread Protector
5/8-11 Hex Nut
5/8 Split Lockwasher
5/8 SAE FLAT WSHR ZNC
Anchor Template
5/8-11 X 14 "J" Bolt
#3 X 30" Rebar
Pull Pin
Actuator Handle
This Manual
48" Board Pad Right
48" Board Pad Left
Net
Post Pad
3/8-16 x 1 3/4" Carriage Bolt
Self T apping Screw-#10 x 1 1/8"
Qty.
2
4
1
2
1
4
4
12
4
8
1
4
4
1
1
1
1
1
1
1
4
10
2L-7638-01