Honeywell Home RedLINK Guide D'installation page 6

RedLINK Installation Guide (EIM)
TM
Link thermostat to wireless network
Zone number
Wireless Setup
0
Zone name
Wireless Setup
36
Back
Wireless Setup
Back
Wireless Setup
Connected
Done
69-2091EFS—09
Press NEXT (always leave zone number set
0
to zero).
Next
M28477
Press NEXT (or see page 11 to change the
52
zone name if needed).
Next
M28478
Press CONNECT to establish a link to the wire-
less network.
Connect
M28479
After a brief pause, the confirmation screen
at left should be displayed, to verify that the
wireless connection has been established.
Press DONE to display the home screen.
M28480
6
Zone numbers 1-4 are for use with
TrueZONE panels only.
Change zone name only if you have more
than one thermostat and EIM.
If E1 appears, see error codes on page 14.