Quick Instructions For C-Hp4 Camera; Hdmi Mode; Usb Mode - Optika Italy H Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour H Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
5.2

Quick Instructions for C-HP4 camera

Before turning on the camera, please connect the standard C-mount camera to the camera adapter and insert it into the
microscope's trinocular port.
① USB mouse connector
② USB2.0 connector
③ HDMI connector
④ ON-OFF button
You can use the C-HP4 camera in 2 different ways. Each application requires different hardware environment.
5.2.1

HDMI Mode

1. Plug the HDMI cable into the HDMI port ③ to connect the C-HP4 camera to HDMI display.
2. Plug the USB mouse into USB Mouse port ① to get control of the camera by using built-in software LiteView.
3. Plug 12V/1A power adapter into DC 12V slot ⑥ to supply power for the camera. The LED Indicator ⑦ will turn into red.
4. Insert SD card into SD Card slot ⑤ for saving captured images and recorded videos.
5. Press ON/OFF Button ④ to turn on the camera. The LED indicator will turn into blue.
6. Move mouse cursor to the left side of the video window, a Camera Control Panel will appear. It includes Manual/ Auto-
matic Exposure, White Balance, Sharpness and other functions, please refer to 6.1 for details.
7. Move mouse cursor to the bottom of the video window and a Camera Control Toolbar will appear. Operations like Zoom
In, Zoom Out, Flip, Freeze, Cross Line, Comparison and so on can be achieved. Please refer to 6.3 for details.
8. Move mouse cursor to the upper side of the video window, a Measurement Toolbar with calibration and other measure-
ment tools will appear, please refer to 6.2 for details. The measurement data can be output with *.CSV format.
5.2.2

USB Mode

1. Plug the USB cable provided with the camera into USB2.0 ② to connect the C-HP4 camera to the computer.
2. Plug 12V/1A power adapter into DC 12V slot ⑥ to supply power for the camera. The LED Indicator ⑦ will turn into red.
3. Press ON/OFF button ④ to turn on the camera. The LED indicator will turn into blue.
4. Start the ProView software.
5. Clicking the camera name in the camera list starts the live video.
NOTE: When the USB cable and the mouse are plugged into the camera at the same time, the USB cable has
priority and the mouse is not available; when the USB cable is unplugged, the mouse can be used normally.
Figure 1 - C-HP4 Rear Panel
⑤ SD card slot
⑥ Power supply plug
⑦ LED indicator
Page 5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

C-hp4

Table des Matières