Publicité
Les langues disponibles
Les langues disponibles
19. Once the Trim Frame end slots begin engagement with
the screws, gently work the Trim Frame back into the
discharge opening until the Trim Frame is seated against
the finished wall. Using a 5/16" hex drive, tighten the
two screws at each end of the Trim Frame assembly to
secure. See Figure 13 and 14.
SCREW LOCATIONS
SCREW LOCATIONS
INSIDE TRIM FRAME
INSIDE TRIM
ENDS USED TO
FRAME ENDS USED
SECURE THE FRAME
TO SECURE
THE FRAME
Finishing Material Minimum Thickness
Page 10
1/2"
MINIMUM
1/2" MINIMUM FINISHING
FINISHING
MATERIAL
THICKNESS
ADJUSTABLE
TRIM FRAME
Figure 13
Empire Comfort Systems Inc. • Belleville, IL
20. Refer to Figures 13 and 14 for the minimum and
maximum finished wall thickness dimension allowed
by the adjustable Trim Frame assembly.
SCREW LOCATIONS
SCREW LOCATIONS
INSIDE TRIM FRAME
INSIDE TRIM
ENDS USED TO
FRAME ENDS USED
SECURE THE FRAME
MATERIAL THICKNESS
TO SECURE
THE FRAME
ADJUSTABLE
TRIM FRAME
Finishing Material Maximum Thickness
MATERIAL THIC
Figure 14
42861-0-1220
2-3/4"
2 3/4" MAXIM
MAXIMUM
FINISHING
FINISHING
MATERIAL
THICKNESS
TRIM
FRAME
TRIM FRA
BRICK,
STONE,
TILE,
BRICK, ST
MARBLE,
TILE, MARB
ETC.
Publicité
