ccei Mid-BRiO Notice Technique page 5

Table of Contents
1. Package contents ........................................................................................................................... 1
2. Safety ......................................................................................................................................... 1
3. Technical specifications ................................................................................................................... 2
4. Installation ................................................................................................................................... 2
4.1. Connection to electricity ........................................................................................................ 2
4.2. Fitting the light in the wall crossing .......................................................................................... 3
4.3. Fitting the light in the BRiO recess (PF10R261 or PF10R262) .......................................................... 3
5. Monochromatic lights: dimming / luminous intensity variation (Only PK10R400-401) ......................................... 3
6. RGB & RGBW lights: Use - Autonomous mode (Only PK10R402-406) ......................................................... 3
7. ................................................................................................................................................. 4
8. Projector Protection ........................................................................................................................ 4
A. Declaration of conformity .............................................................................................................. 4
Read these instructions carefully before installing, commissioning and using this product.
Immersed use only.
Only use a safety transformer.
1. Package contents
1 light Mid-BRiO & Mid-BRiO LT M24 & X24 (white or multicoloured) with
• Cable included: 3m
• Technical manual (this document)
2. Safety
If there is an abnormal temperature rise inside the Mid-BRiO & Mid-BRiO LT M24 & X24, a safety device reduces the automatic
lighting intensity. If the heat is too high, even following a reduction in the intensity, the floodlight cuts the lighting and emits
red flashes. As soon as the temperature returns to normal, the lights return to normal operational.
MPNT0419 v1.0EN (29/01/2021)
Technical information sheet
Mid-BRiO & Mid-
BRiO LT M24 & X24
Underwater LED lighting
Ref: PK10R400 (M24) / PK10R401 (M24K) /
PK10R402 (X24) / PK10R404 (M24 LT) / PK10R405
(M24K LT) / PK10R406 (X24 LT)