Charging Instructions; How To Check The Charging Status - Mando footloose Manuel

Mando Footloose user manual
Battery and charging

Charging Instructions

1. 2A General Charger
1) Plug the power cord into an electric 2) Connect the charging plug to Mando
outlet. Footloose.
4) When charging is completed (the green 5) Unplug the power cord from the electric
lamp of the charger means ON), disconnect outlet.
the charging plug from Mando Footloose.
2. 4A High-speed Charger
1) Ensure that the power of the charger is 2) Connect the charging plug to Mando
'OFF'. Plug the power cord into an Footloose.
electric outlet.
4) Charge (the red lamp of the charger 5) Charging completed (the green lamp of
is ON). the charger is ON).
7) Disconnect the charging plug from 8) Unplug the power cord from the electric
Mando Footloose. outlet.
Do not disconnect the charging plug from Mando Footloose while charging. It may
cause false operation or a failure.
16
F-6
3) Charge (the red lamp of the charger
means ON).
3) Turn on the power of the charger.
6) Turn off the power of the charger.
If charging does not begin properly, turn off the power of the
charger and retry charging.
A new way of moving
Battery and charging

How to check the charging status

1. How to check the charging status
1) Indication by the charging lamp
4A High-speed charger
2A General
Charger
Left Lamp
Power Off Off Off
Standby Red Red
In Progress Red Red
Completed Green Red
2. Troubleshooting
1) Power LED is not ON
- Check if AC power is ON and if the power cord is plugged properly.
2) Red LED is not ON while charging the battery
- Check if the charger port is properly plugged.
3) Red LED does not change to green LED while charging the battery
- Check whether the room temperature is at the optimal temperature. If red
LED is still ON at the optimal temperature, it indicates that the battery has
a failure - contact the store.
4) Red LED changes to green instantly
- It indicates that the battery is fully charged. Otherwise, it indicates that the
battery has a failure - contact the store.
5) Green LED is ON even though the battery is not fully charged
- Repeat recharging the battery after completely discharging 2~3 times. If
you still have the same problem, contact the store.
Time to Charge
Using a general charger, it usually takes about 5.5 hours when the
battery icon on the HMI screen is completely empty (it takes about 3
hours when using a high-speed charger, sold separately).
* The time to fully charge a battery varies with the condition of the battery and the room temperature.
English
F-7
Even though charging may begin normal-
ly, it may be discontinued when the bat-
tery temperature exceeds the possible
Right Lamp
charging temperature in order to protect
the battery. In this case, cool down the
Off
battery and charge the battery again at
a cooler place
Off
Despite the battery is at between 0~
Red
30°C, if the battery is charged at a place
exposed to direct sunlight or directly after
Green
a ride, charging cannot be initiated
because the interior temperature of the
battery is out of the possible charging
temperature range.
F-8
If you find any problem while charging a
battery, turn off the power of the charger
immediately, disconnect the charging
plug of the charger from the product, and
unplug the power cord from an electric
outlet.
* Charging a battery that has not been
used for a long period of time may
take longer and as long as the red
LED is ON, you may consider it as
working properly.
17