Beaba BABYCOOK Notice D'utilisation page 7

cLEANING
• Always unplug the appliance before you start cleaning it.
• Immediately rinse the accessories that have come into contact with the food
under running water to prevent germs forming.
• Descale the heating reservoir regularly using white (distilled) vinegar only. Ensuring
the device is cold and not connected to the mains, pour a mixture of 100 ml of
water and 100 ml of white (distilled ) into the heating reservoir. Leave for the
night and then empty. Repeat the operation if necessary until all the lime has
been removed. Connect the device to the mains and then complete two heating
cycles using water only in the heating
reservoir (3 measures - 150 ml) in order
to rinse it well. Then clean the bowl and
accessories with warm, soapy water.
• Never use a chemical descaler or a
coffee machine descaler in the heating
reservoir.
• After you have cleaned the blade, make
sure that the gasket is properly back in place.
• Babycook accessories are not suited to sterilization.
REcOMMENDATIONS
• Never put the bowl on the pedestral without the food processor blades in place.
• Do not move the appliance or put a cover over it while in use.
• Never immerse the electrical pedestal unit in water.
• Keep the BABYCOOK out of children's reach and always lock the bowl lid fully so
that the blade is inaccessible.
• Use the BABYCOOK on a flat surface and stable.
• Plug the Babycook into an earthed 110 V socket.
• Do not run the BABYCOOK in cooking mode when the reservoir is dry.
• Do not fill the bowl above the mark lines.
• Regularly check that the steam outlet hole on the bowl is not blocked.Do not
add water to the cooking bowl before mixing. There is a risk of very hot liquid
being splashed when mixing.
• Never lean over the steam outlet hole during the cooking cycle (risk of scalding).
• Handle hot parts with great care.
• Regularly de-scale the heating reservoir.
• If you need to make a claim, please quote the number printed on the label
located on the underside of the Babycook heating pedestral.
• Any handling of the device must be carried out under the responsability of an
authorized person.
All manuals and user guides at all-guides.com
7
Placing the gasket on the blender cutter