Chauvet DJ SWARM 4FX Mode D'emploi page 25

IRC-6 (Infrared Remote Control) Operation
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
Swarm 4 FX User Manual Rev. 2
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
Press and hold <AUTO> on the IRC-6.
•
Press any number between <0> and <9> to choose your auto program.
•
<0> Aut0
o
<1> Aut1
o
o <2> Aut2
o <3> Aut3
o <4> Aut4
Press <+> or <–> to either increase or decrease the speed of the program.
•
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
Press and hold <SOUND> on the IRC-6.
•
Press any number between <0> and <9> to choose your auto program.
•
o <0> Sou0
o <1> Sou1
o <2> Sou2
<3> Sou3
o
<4> Sou4
o
Strobe Modes
To adjust the strobe program and rate:
• Press <STROBE> on the IRC-6.
Press <0> to strobe all, or any number between <1> and <9> to choose your auto program.
•
Press <+> or <–> to increase or decrease, respectively, the strobe rate.
•
• Press <STROBE> again to turn off the strobe.
Moonflower Color Modes
To set a specific color output for the moonflower effects:
Press <R> for red.
•
Press <G> for green.
•
• Press <B> for blue.
Press <A> for amber.
•
Press <UV> for purple.
•
• Press <W> for white.
Miscellaneous Operation
To black out the lights:
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
•
again.
<5> Aut5
o
<6> Aut6
o
o <7> Aut7
o <8> Aut8
o <9> Aut9
o <5> Sou5
o <6> Sou6
o <7> Sou7
<8> Sou8
o
<9> Sou9
o
Page 25 of 80