Oakley Holeshot 3-Hand Manuel D'instructions page 5

04 HOLESHOT 3-HAND INSTRUCTIONS MANUAL
TO ADJUST THE TIME AND DATE FOR SUBSEQUENT SETTINGS, USE
THESE SHORT PROCEDURES
TO SET THE TIME
1. Pull the crown out to the second click position (b).
2. Turn the crown until you reach the correct time.
3. Push the crown back down.
TO SET THE DATE
1. Pull the crown out to the first click position (a).
2. Turn the crown until you reach the correct date.
If the current time is between 9 PM and
midnight, set the date to the following day.
(This is necessary to ensure the date
display will normally change at midnight
instead of 12 noon.)
3. Push the crown back down.
Second Hand
Crown
A B
Date