Publicité
Les langues disponibles
Les langues disponibles
• Operation, maintenance and service requirements
are covered in these instructions. Read completely
before operating shredder.
• Keep away from children and pets. Keep hands
away from paper entry. Always set to OFF (O) or
unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair,
etc. – away from shredder openings. If object enters top
opening, switch to Reverse (
• Never use aerosol products, petroleum-based or
aerosol lubricants on or near shredder. Do not use
canned air or air dusters on shredder. Vapors from
propellants and petroleum-based lubricants may
combust causing serious injury.
• Do not use if damaged or defective. Do not
disassemble shredder. Do not place near or over
heat source or water.
1.
Plug in and
2. Press ON ( )
put disconnect
power switch in
ON (I) position.
PAGE 2 OF 15
) to back out object.
OPERATING INSTRUCTIONS
AUTO
3. Feed paper
to activate
straight into
(blue).
paper entry
and release.
SAFETY
• This shredder has a disconnect power switch that must
be in the ON (I) position to operate the shredder. In
case of emergency, move switch to OFF (O) position.
This action will stop shredder immediately.
• Avoid touching exposed cutting blades under
shredder head.
• Shredder must be plugged into a properly
grounded wall outlet of the voltage and amperage
designated on the label. The grounded outlet or
socket must be installed near the equipment and
easily accessible. Energy convertors, transformers or
extension cords should not be used with this product.
• Fire hazard – do not shred greeting cards with sound
chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
4. To shred CDs
or credit cards,
rotate safety
flap into place.
AUTO
5. Hold card/CD
6. When finished
at edge. Feed
into center
of entry and
release.
shredding,
set to OFF ( )
position.
0422 IH-2608
Publicité
