Panduit PPTMT Instructions D'utilisation page 3

PPTMT KITS SOLD SEPARATELY • CONTACT PANDUIT FOR MORE INFORMATION
TTLK3 Tool Tension Locking Kit - Install to prevent adjustment of the selector knob.
TECHNICAL SPECIFICATIONS - Air Supply
Recommended regulated air pressure to tool (pressures
other than recommended may result in unsatisfactory opera-
tion):
Air consumption at 30 cycles per minute:
Line pressure to regulator:
Filter/regulator requirements:
Lubrication for air supply:
Recommended filter/regulator unit (supplied by user) with
1/8" NPT ports and 1/4" quick disconnect (industrial inter-
change) plug:
Recommended main air supply hose (10 ft.) from filter/regu-
lator to tool (supplied by user); includes a 1/8" NPT male
connector (to regulator) and a 1/8" quick disconnect socket
(to tool):
OTHER SPECIFICATIONS
Test Condition: Values determined during cycle of PANDUIT PPTMT @ 85 PSIG, tension indi-
cator at HVY, and tension setting at maximum.
Vibration:
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value a
Uncertainty K
Values determined according to EN 28662-1:1992
Noise:
Declared Dual-Number Noise Emission Values in accordance with ISO 4871
Measured A - weighted sound power level, L
Uncertainty, K , in decibels
WA
Measured A - weighted emission sound pressure level, L
decibels
Uncertainty, K , in decibels
pA
Values determined according to noise test code ISO 15744, using the basic standard ISO
11201:1995
PPTMT OPERATION INSTRUCTIONS
KPPTMTB Blade Replacement Kit - For replacement of a worn blade.
KPPTMTG Gripper Replacement Kit - For replacement of a worn gripper.
ITEM
DESCRIPTION
(ref. 1 pW), in decibels
WA
Regulator settings: 85 PSIG (5,9 bar) with a max. 10 PSI
0.47 cfm @ 85 PSIG (0,222 l/sec @ 5,9 bar)
Minimum 80 PSIG (5,5 bar), Maximum 125 PSIG (8,6 bar)
5 micron maximum element rating, 5 PSIG (0,3 bar) maxi-
mum pressure drop @ 80 PSI (5,5 bar) inlet pressure and 12
cfm (5,7 l/sec) flow minimum.
Air line lubricators are NOT to be used.
Recommended source: Panduit Part Number PL289N1
Recommended source: Panduit Part Number PPH10
(ref. 20µPa) at the workstation, in
pA
Page: 2 of 15
DESCRIPTION
(0,7 bar) drop. DO NOT EXCEED 90
PSIG (6,2 bar).
VALUE
4.5 m/s
1.0 m/s
2
2
102
2.5
91
2.5