Pairing One's Speaker To A Bluetooth Source - Elipson Prestige Facet PF 6B BT Mode D'emploi

VII. PAIRING ONE'S SPEAKER TO A BLUETOOTH SOURCE
PAIRING WITH REMOTE CONTROL
Pair
1
Aux 1 Aux 2
Turn on your Prestige Facet.
4
Please make sure that the
Bluetooth function is enabled
on your Bluetooth Audio
Device.
PAIRING DIRECTLY ON THE ACTIVE SPEAKER
1
Turn on your Prestige Facet
6B BT or your Prestige Facet
14F BT with a short press on
the volume control.
4
Make sure the Bluetooth
function is enabled on your
Bluetooth audio device.
Pair
Aux 1 Aux 2
Reset
2
Opt
On the remote,
Bluetooth key.
5
On your Bluetooth Audio
Device, please select PF6BBT
or PF14FBT. If you are asked
for code, please use 1234 or
0000.
2
Press the volume control
briefly to switch to bluetooth
input selection, or to select
another input.
5
On your Bluetooth Audio
Device, please select PF6BBT
or PF14FBT. If you are asked
for code, please use 1234 or
0000.
29
Reset
Opt
3
Aux 1
On the remote, select Pair
press
key. This will put your Prestige
Facet into detectable mode.
The LED light will flash quickly.
6
If pairing is successfull, the
LED light will stay solid.
3
Press and hold the volume
control. This
your Prestige Facet to be
detected. The LED light will
blink rapidly.
6
If pairing is successfull, the
LED light will stay solid.
Pair Reset
Aux 2 Opt
3''
will allow