Publicité
Les langues disponibles
Les langues disponibles
FOR UNDERCOUNTER INSTALLATIONS
Drill the required faucet holes, and install the faucet to the
countertop according to the faucet manufacturer's instructions.
Equally space the required number of clamps, and locate the
clamp-mounting holes on the underside of the countertop (the
required number of clamps is listed in the chart on Page 2).
For installation to solid, non-wooden countertops, drill 3/8" diameter
holes 5/8" (1.6cm) deep to accommodate the anchors provided.
Install the anchors flush with the countertop bottom surface. Install
the clamps.
Turn the clamps parallel to the opening to allow for easy installation
of the sink.
Clean the top of the sink rim with a non-abrasive cleaner (see
Important Consumer Information on Page 8).
Clean the underside of the countertop around the cutout area,
making sure the surface is smooth, clean, and free of defects.
Apply a generous bead of sealant to the top surface of the sink rim.
A
1007261-2-
Countertop Opening — Bottom View
Clamp
Screw
4
Fig. #6
Anchor
Edge
Countertop
Opening
2"
1/8" (5.1cm 3mm)
Fig. #7
Fig. #8
Kohler Co., Kohler, WI U.S.A.
Publicité
