Performance/Safety Features - Kenmore AllergenSeal DU2055 Manuel D'entretien Et D'utilisation

THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction motor.
If a clog prevents the normal flow of air to
the motor, the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.
To reset thermal protector: Turn the
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal protectors
to reset.
CAUTION
Always return the vacuum cleaner to
the upright position before using the
hose and attachments. Failure to do
so may result in overheating of the
brushroll motor and can cause the
thermal protectors to trip.
Check for and remove clogs, and
empty dust cup if necessary. Also check
and replace any clogged filters. Wait
approximately 50 minutes before restarting
vacuum cleaner.
HAIR ELIMINATOR™ BRUSHROLL
For best performance, the motorized
nozzle is equipped with a hair eliminator
brushroll, which prevents build-up of hair,
string and other debris on the brushroll.
To remove any hair wrapped around the
brushroll, simply continue vacuuming,
allowing the brushroll to automatically
remove the hair wrap and send it to the
dust cup.

PERFORMANCE/SAFETY FEATURES

Comb Teeth
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
brushroll when vacuum is on. Contacting
the brushroll while it is rotating can cut,
bruise or cause other injuries.
BRUSHROLL RESET
The brushroll has built-in protection against
motor damage should the brushroll jam.
If the brushroll slows down or stops, the
brushroll overload protector shuts off the
brushroll motor and the brushroll indicator
light emits red light. The vacuum cleaner
suction motor will continue to run.
Brushroll Indicator
Light
To correct problem: Turn off and unplug
the vacuum cleaner, remove obstruction,
then turn on the vacuum cleaner.
NOTE:
Once the motor has cooled,
the brushroll will automatically reset. The
brushroll will return to normal operation
if the jam has been cleared when the
vacuum cleaner is turned on again.
If the problem persists, contact the vacuum
cleaner help line for assistance.
- 14 -