Festo SPC200 Mode D'emploi page 18

4.2 Connecting the measuring system
Connect the measuring system cable of the drive with
S
the measuring system connection of the axis interface.
Please note
Connect only the original measuring system. Use only
the original cable. Do not extend the cable. Use the
short cable length to avoid interference from electro
magnetic sources.
1
Measuring system
connection
(socket top view)
Pin
1
2
3
4
5
Housing
18
Function
+24 V
n.c. (not connected)
0 V
CAN_H
CAN_L
GND
Festo SPC−AIF−MTS−2 0611NH English