Operation Tips; Maintenance; General Maintenance; Replace The Scraper - GreenWorks Pro SNC407 Manuel D'opérateur

Souffkeuse à neige
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8.7

OPERATION TIPS

If it is possible, clear the snow with the direction of the
wind.
In strong winds, lower the chute deflector to direct the
snow to the ground.
When you complete the work, let the machine operate for
a while to prevent ice formation in the discharge chute.
If the snow is deeper than 8", decrease the speed and let
the machine work at its own rhythm.
Do not use the scraper to remove compact snow and ice.
9

MAINTENANCE

WARNING
Remove the battery pack from the machine before
maintenance.
CAUTION
Use only approved replacement parts.
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
9.1

GENERAL MAINTENANCE

Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
Tighten all the fasteners and caps correctly.
Clean the remaining snow on the machine with a brush.
English
9.2

REPLACE THE SCRAPER

24
Use only approved replacement scrapers.
Wear heavy gloves or wind cloth around the impeller when
you touch the impeller.
1. Remove the screws (24) from each side plate.
2. Remove and discard the old scraper (8).
3. Install the new scraper (8).
4. Put in the mounting screw (25) and spacers and tighten
them.
9.3

REPLACE THE IMPELLER

Use only approved replacement scrapers.
1. Remove the 5 screws (24) and side wear pad (26) that
secure the right side cover (31).
11
25
24
WARNING
WARNING
WARNING
EN

Publicité

Table des Matières
loading

Table des Matières