Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
2. Turn the grip handle (3) right to move the discharge chute
(10) to the right.
8.6
ADJUST THE CHUTE DEFLECTOR
12
You can adjust the chute deflector up and down to change the
throwing distance of the snow.
Release the bail switch before you adjust the chute
deflector.
Do not push the deflector so far forward that a gap shows
between the deflector and the chute.
1. Push and hold the trigger on the chute deflector.
2. Move the chute deflector (12) up to increase the snow
distance.
3. Move the chute deflector (12) down to decrease the snow
distance.
WARNING
WARNING
English
8.7
LED HEADLIGHTS
2
14
9
Turning the headlights on
1. Push and hold the safety switch button (14).
2. Pull the bail lever (2) in the direction of the handle bar to
turn the headlights (9) on.
Turning the headlights off
3. Release the bail lever (2).
8.8
OPERATION TIPS
•
If it is possible, clear the snow with the direction of the
wind.
•
In strong winds, lower the chute deflector to direct the
snow to the ground.
•
When you complete the work, let the machine operate for
a while to prevent ice formation in the discharge chute.
•
If the snow is deeper than 8", decrease the speed and let
the machine work at its own rhythm.
•
Do not use the scraper to remove compact snow and ice.
9
MAINTENANCE
Remove the battery pack from the machine before
maintenance.
Use only approved replacement parts.
10
WARNING
CAUTION
Publicité
Table des Matières
