This Is How You Pack Up Your Skotti - Skotti-grill 414784989 Manuel D'instructions

This is how you pack up your Skotti
8 This is how you pack up your Skotti
When Skotti has cooled down after grilling, you can easily stow away all
all the parts in the washable bag, saving space.
To take Skotti apart, proceed as follows:
1� Make sure that the gas is off, with the screw turned to the right, and
the parts have cooled down.
2� Disconnect the gas cartridge form the gas regulator.
3� Turn the gas nozzle counterclockwise to separate it from the round
end of Skotti's burner pipe (3).
4� Position yourself in front of Skotti so that the round end of the
burner pipe (3) points to the right.
5� Use both of your index fingers to lift both tabs (those in the left slits)
from the grill rack (1).
6� Carefully move the grill rack (1) to the left and lift it up a little at the
same time.
The grill is now unlocked.
¨
7� Lift the head panel (7) with the round end of the burner pipe (3)
facing upwards and disconnect it from the baffle plate (2) and the
burner pipe.
8� Pull the baffle plate (2) from the slots of the foot panel (5).
9� Lift the burner pipe (3) from the round end and carefully unhook the
squeezed end at a steep angle from the slot in the foot panel (5).
10� Pull the bottom panel (8) away from the foot (5) and side panels (6)
and place the dirty side on the grill rack (1).
11� Pull the bottom panel (8) away from the long side panels (6) and the
foot panel (5).
12� Pull the long side panels (6) from the foot panel (5).
Skotti is now taken apart.
9
Tipp
We recommend putting the parts back into Skotti's bag in the follow-
`
ing order:
rack / bottom panel (as a rooftop on top) / 2 side panels / head and
foot panel / baffle plate.
16