Connecting The Gas - Skotti-grill 414784989 Manuel D'instructions

This is how you set up your Skotti
5.5 Connecting the gas
Possible danger to life due to incorrect use of gas cartridges
Use Skotti in gas operation with a standard EN417 propane/butane
`
gas mixture only, using approved cartridges up to a maximum of
500g.
The resealable gas cartridge must have an appropriate thread for
`
your gas regulator (7/16 x 28 UNEF thread).
Before connecting the gas cartridge, make sure the gaskets between
`
the device and the gas cartridge are in working order and condition.
Never use Skotti with defective or worn out gaskets.
Connect the gas cartridge outdoors only. Keep a safe distance from
`
ignition sources and other people.
Avoid twisting the gas hose.
`
To connect the gas, proceed as follows:
11
1� Carefully screw the gas nozzle onto the round end
of Skotti's burner pipe. The end should be fixed
firmly without applying too much pressure.
2� Before connecting the gas cartridge, close the gas
tap with a firm twist to the right. ( )
3� Screw the gas cartridge onto the gas regulator, not
the other way around!
The gas is now connected.
9