This Is How You Set Up Your Skotti; Where To Set Up Your Skotti; Setting Up Skotti - Skotti-grill 414784989 Manuel D'instructions

This is how you set up your Skotti
5 This is how you set up your Skotti
5.1 Where to set up Skotti
Note the following when choosing a grilling spot:
Skotti and its individual parts can heat up to very high temperatures,
ƒ
so you should not move the grill during use. Before lighting the grill,
you should consider carefully if the grilling spot meets the safety
requirements.
Put Skotti on a flat and stable surface and make sure that there is
ƒ
enough space (at least 5 cm) between Skotti and the surface it is on.
Otherwise, unlit gas can escape through the bottom of the grill. This
can cause an explosion.
If Skotti is sinking or leaning on sand, snow, ice, or uneven surfaces, put
ƒ
a piece of wood or rock under the edges in the stands to balance it.
Follow the assembly instructions. If Skotti is improperly set up, you
ƒ
place yourself and others at an unpredictable risk.
5.2 Setting up Skotti
To set up Skotti, proceed as follows:
1� Take one long side panel (6) with the Skotti logo
on it and slide the short foot panel (5) with the
honeycomb-shaped hole onto it at the corre-
sponding slits. Both panels have a small triangle
mark at the slits.
2� Slot the other long side panel (6) onto the foot
panel (5) at the slim slits on the side with the
Skotti logo.
3� Slide the bottom panel (8) into the three-sided
structure, pointed side down. Make sure that the
hooks and tabs are at an equal height with the
slits and the smooth edge of the panel is facing
you�
4� Slide the hooks into the slits on the side panels (6).
5� Slide the tabs into the slits on the food panel (5).
8