Grounding - Minolta PagePro 1100L Guide D'utilisation

Note
• Use a power source with minimal voltage and frequency fluctuation.
• Only use an outlet that is rated for the voltage capacity specified for this printer.
• Be sure to plug the power cord all the way into the outlet. The outlet should be located
near the printer and be easily accessible so you can unplug the power cord immedi-
ately should any problem occur.
• Make sure the outlet you use is visible, and not hidden behind the printer or any other
object.
• If any other electrical equipment is plugged into the same outlet, make sure that the
capacity of the outlet is not exceeded.
• If you use an extension cord, make sure its capacity is greater than the power con-
sumption of the printer. Using an extension cord with a lower capacity creates the dan-
ger of fire.
• Never use a multiple socket to connect other appliances or machines to the same out-
let being used to power the printer.

Grounding

Always ground the printer to guard against the danger of electrical shock. To
ground the printer, connect the grounding wire to the ground terminal of the electri-
cal outlet you are plugging in to or to a grounding contact that complies with local
electrical standards in your area.
Note
• Never connect the grounding wire to a gas pipe, the grounding wire for a telephone, or
to a water pipe.
En-14