Kalorik JK 40770 Mode D'emploi page 9

CLEANING AND MAINTENANCE
Before attempting any cleaning operation, make sure the
•
appliance is unplugged from the supply socket and fully cooled
down.
To clean the exterior surfaces, simply wipe over with a soft, damp
•
cloth and dry thoroughly.
Never use abrasive products, powders or scouring pads.
•
Under no circumstances shall the jug kettle or its power base be
•
immersed in water.
To remove mineral deposits from the water kettle, use products
•
(decalcifying solutions) made especially available for this purpose.
Make sure to use a type recommended for kettles or coffee makers.
Follow the guidelines as recommended by the manufacturer of the
de-calcifying solution. Rinse well.
FILTER
• Your appliance is provided with a mesh filter. This filter is factory pre-
installed before the spout.
• The filter is placed in front of the spout. Filter should be rinsed clean
regularly. For this, press the filter out, rinse under water, and put it
back into position once clean.
• Please clean the filter on a regular basis, to avoid mineral deposit.
www.KALORIK.com
9
JK 40770 - 200421