OPERATING INSTRUCTIONS
To reactivate the unit, turn the Power & Temperature switch once to
the right.
1
Turn the Power & Temperature Switch
to the right once to turn the tool on.
Lights will cascade, then turn solid
when the unit is ready to use.
To turn the tool off, turn the Power &
Temperature Switch to the right and
hold for 2 seconds. The lights will
cascade to the left and turn off.
2
To change the temperature*, turn the
Power & Temperature Switch to the
right again. Continue to turn the switch
to cycle through the temperature
settings.
3
Release the Power & Temperature
Switch after reaching your desired
temperature. The selected
temperature light(s) will blink, and
lights will cascade left or right to
your selected temperature. Wait for
the lights to turn solid before using
the tool.
NOTE: Each time you turn on this styling tool, it will heat up to your
last set temperature.
* See temperature Guide in Operating Instructions for recommended
settings.
SINGLEPASS CURL
11