Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION FOR ASSEMBLING
A
B
1. Open the valve cap by twisting counter-clockwise. Ensure the valve is
clear from debris, sand, or dirt before releasing.
2. Push valve button in and turn counter-clockwise 90 degrees so it pops up
and is in the "OUT" position.
3. Insert the pump hose and twist it 45 degree clockwise to lock in place.
Inflate until you reach the required pressure.
12PSI minimum (8PSI for MEGA/ 10PSI for
HYPER inner chamber) for proper inflatable
boards operation and 15PSI maximum (18PSI
for SUPER TRIP TANDEM/ RAPID/ RACE/ WAVE/
BLADE/ AIRSHIP RACE ). Over inflation will void
your warranty.
AND DISASSEMBLING
①
Pump Set Up And Inflation
Connect the pump hose to the
gauge housing and secure it tightly.
9
①
Publicité
