Sonus Faber Gravis Mode D'emploi page 36

SONUS FABER GRAVIS III ACTIVE SUBWOOFER
Speaker System type
Driver
Amplifier type
Power output
Frequency response
Mains input voltage
Fuse
Controls
Audio inputs
Additional features
Data connection
Power consumption
Finish
Dimensions (H x W x D)
Weight
Supplied accessories
Sealed box loading, single driver, active subwoofer
1 x 250 mm (10") long throw, sandwich honeycomb cone, wide rubber surround LF unit
High performance, Class AB
600 W (nominal), 900 W (peak)
25 Hz (@- 6dB, acoustic Linkwitz 4th order roll-on, default setting) to Fc (user continuously
adjustable)
100-120Vac – 50/60Hz or 220-240 Vac – 50/60 Hz. Factory selected
T6.3A L250V (100-120 Vac – 50/60 Hz)
T3.15A L250V (220-240 Vac – 50/60 Hz)
Direct access Master volume;
APP control featuring: 4 selectable presets, volume, continuously adjustable crossover
frequency (40 to 150 Hz , filtering slope 24 dB/oct); continuously adjustable signal phase
(0° to 360°); up to 8 parametric EQ filters , Delay (1 to 20 ms); automatic room calibration ;
selectable threshold auto power on/off
2 x LINE (unbalanced), Left and Right/LFE - RCA plugs
1 x LINE (balanced) - XLR plug
HIGH LEVEL - Neutrik 4-pole Speakon
Wireless connection (receiver included and transmitter unit available separately)
USB (firmware update)
RJ45 (ext control)
< 2 W (Stand-by)
700 W (rated power)
Black leather (cabinet)
Piano Black, Wengè Matte, Walnut Matte (top)
415 x 400 x 495 mm
16.3 x 15.7 x 19.5 in
26.7 Kg
58.8 lb
User manual
App Quick Guide
AC Power cord
10m/32.8 ft Neutrik Speakon
plug
©
interconnection cable
©
34