Sonus Faber Gravis Mode D'emploi page 35

SONUS FABER GRAVIS II ACTIVE SUBWOOFER
Speaker System type
Driver
Drone cone
Amplifier type
Power output
Frequency response @-6
dB
Mains input voltage
Fuse
Controls
Additional features
Audio inputs
Power consumption
Finish
Dimensions (H x W x D)
Weight
Supplied accessories
Drone cone phase-inverter loading, active subwoofer
1 x 260 mm (10") long throw, treated paper cone, wide
rubber surround LF unit
1 x 260 mm (10") long throw, treated paper cone, wide
rubber surround ABR unit
High linearity Class AB
350 W (nominal), 700 W (peak)
From 25 Hz to Fc (user adjustable)
Factory selected, 120 Vac – 60 Hz or 230 Vac - 50 Hz
T6.3A (110 Vac, 60 Hz); T3.15A (230 Vac, 50 Hz)
Independent Master and LFE volume controls;
Continuously adjustable Crossover frequency (30 to 120 Hz),
slope 24 dB/oct;
Signal phase inversion switch (0/180°)
Auto switch-on/off (deselectable)
LFE (Low Frequency Effect), mono RCA plug;
LINE, mono RCA plug;
HIGH LEVEL, Neutrik 4-pole Speakon
0.5 W (Stand-by)
450 W (Rated power)
Matte White, Piano Black, Wood
404 x 356 x 408 mm including feet
15.9 x 14 x 16 in including feet
21.5 Kg
47.3 lb
User manual
AC Power cord
10 m/32.8 ft Neutrik Speakon
©
interconnection cable
©
33