Insert And Format The Memory Card - Bresser 9686100 Mode D'emploi

5.
6.
7.
8.
NOTICE! Although the camera is equipped with an in-
tegrated battery, we recommend using a permanent
power supply. An in-car charger is included in the deliv-
ery for use while driving.
Removing the mount
Slide the mount sideways in the direction of the on/off but-
ton and then lift it out upwards.

9 Insert and format the memory card

1.
2.
3.
4.
5.
6.
36 / 92
Push the lever back up.
Loosen the locking ring by turning anti-clockwise and
rotate the camera into the desired position.
Turn the locking ring clockwise by hand to tighten.
Setting up power supply
Insert the appropriate microSD card* with the shorter
side forward in the microSD card slot. The contacts of
the card must point towards the display.
Once the power supply is connected, the device
switches on automatically and starts video recording.
Press the OK button to stop recording.
Press the MENU button twice to enter the 'Basic set-
tings' setup menu.
Press the UP or DOWN button to select 'Format' and
press the OK button.
Press the UP or DOWN button to select 'SD card' and
press the OK button.
In the Info window 'Format memory / Delete all data'
use the UP or DOWN button to select OK and press
the OK button. The storage medium will be formatted.