GB
Servicing
We recommend the regular removal of deposits or encrustations depending upon the degree of
contamination. To this end, the dirty areas of the pump and the tank (if existent) are to be rinsed
with clear water. Make sure that the float of the pump does not get dirty! If necessary, also clean
the filter 'A' (fig. 5, page 3) of the pump.
Condensate from condensing boilers is aggressive! Avoid contact with the conden-
Warning
sate in the tank, on the pump and in the feed or pressure hose or wear suitable
protective gloves.
10. Disposal
This product and its parts are to be disposed of in an environmentally friendly way. Relevant local
regulations are to be observed.
11. CE conformity declaration
The condensate pump / condensate raising system conforms to the following European standards:
EN 60335-1
EN 60335-2-41
EMC 2004- 108 / EC
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
2006 / 95 EC
EN 50366
3062692_201208
Disposal / CE conformity declaration
(Safety of electrical equipment)
(Electromagnetic compatibility)
(Low-voltage directive)
(Household and similar electrical appliances)
13