Publicité
Les langues disponibles
Les langues disponibles
NESTING THE OPENSHOT
47
48
49
Your treestand is designed to "nest" together as one
unit making it easy to transport.
1. Untie the umbilical cord from the seat climber
and wrap it around the platform yolk several times to
secure it.
2. Start with the platform portion of the stand,
setting it on its end as shown in figure 47.
3. Take the seat climber and slide it into the platform
so that its upright braces and cable bracket are next
to the same areas on the seat climber as shown in
figure 48.
4. Secure the top and platform together with the 1"
wide green strap with the spring loaded tourniquet
buckle as shown in figure 49. This will prevent the
50
seat and the platform from making noise as you hike
to your hunting location.
5. Use the backpack straps to carry the unit on your
back as shown in figure 50. Pull the loose end of the
straps to tighten and pull up on the buckle to release.
There are numerous ways to route the seat and
backpack straps when packing - this is only one
example! Your backpack straps are adjustable. Pull
down on the free end to tighten and lift up on the
buckle to loosen.
PG 18
www.summitstands.com
Publicité
