Télécharger Imprimer la page

Electrolux WASL 3 T Notice D'utilisation page 39

Masquer les pouces Voir aussi pour WASL 3 T:

Publicité

Les langues disponibles

Les langues disponibles

ments if you have selected the "prewash"
option. Pour fabric softener into the com-
partment
if necessary.
Selection of desired programme
Turn the programme selector to the re-
quired programme. The "Start/Pause"
pushbutton flashes green.
If you turn the programme selector to an-
other programme while a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. "Err" flashes and the
"Start/Pause"
pushbutton flashes red for
a few seconds.
Selecting the temperature
Press the "Temperature"
peatedly to increase or decrease the tem-
perature if you want your washing to be
washed at a different temperature to the
one selected by the appliance (see "Pro-
grammes table"). The
cold wash.
Selecting the spin speed
Press the "Spin"
the spin speed, if you want your washing to
be spun at a different speed to the one se-
lected by the appliance. can also select "No
spin"
, "Rinse hold"
4)
plus"
.
The maximum spin speeds are :
for Cottons , Eco : 1500 rpm, for Cool-
Clean : 1200 rpm, for Lingerie , Wool :
1000 rpm, for Synthetics , Easy Iron , 14
Min , Shirts : 900 rpm, for Delicates , Blan-
ket : 700 rpm.
At the end of the programme, if you have
selected "Rinse hold"
plus"
, you then need to select a " Spin "
or " Drain "
programme to finish the
cycle and empty the water.
Night silence plus : the cycle contains no
spin and ends with a rinse hold.
Selecting options
You must select the different options after
selecting the programme and before press-
ing the "Start/Pause"
"Programme table"). Press the desired but-
ton(s) ; the corresponding symbols appear
on the display. If pressed again, the sym-
4) Depending on model.
pushbutton re-
symbol means a
pushbutton to change
or "Night silence
or "Night silence
pushbutton (see
bols disappear. If one of the options is not
compatible with the selected programme,
"Err" flashes on the display and the "Start/
Pause"
pushbutton flashes red.
"Prewash" option
The appliance runs a prewash at 30°C
max.
"Rinse plus" option
The washing machine will add one or more
rinses during the cycle. This option is rec-
ommended for people with sensitive skin
and in soft water areas.
Temporary : Press the "Rinse plus"
pushbutton. The option is only active for the
selected programme.
Permanent : Hold down the "Prewash"
and "Delay Start"
seconds. The option is permanently activa-
ted, even if the appliance is switched off. To
deactivate it, repeat the process.
"Delay start"
This option allows you to delay the start of a
wash programme by 30, 60, 90, 2 hours to
20 hours. The selected time appears on the
display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the
"Start/Pause"
pushbutton, by pressing
the "Delay start"
indicates immediate start).
If you have already pressed the "Start/
Pause"
pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delayed start and start the
cycle immediately, press "Start/Pause"
and then "Delay start"
"Start/Pause"
• To change the timer delay period, you
must go through the "Stop"
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
"Start/Pause"
pushbutton. After closing
the lid again, press the "Start/Pause"
pushbutton.
electrolux 39
pushbuttons for a few
pushbutton again (0'
. Press
to start the cycle.
position

Publicité

loading