Medion LIFE E74023 Mode D'emploi page 167

 Press O K again. The DEVICE SELECT prompt
appears.
 Use a source key to select the device type to which
the VOL/MUTE control is to be applied.
 PLEASE WAIT appears again in the display, fol-
lowed by the confirmation message SUCCESS.
If you accidentally selected a device that does not
have its own volume control, an error message ap-
pears.
13.2.2. Switching off the VOL/MUTE
universal function for a specific
device
You can programme the universal remote control
to only use a device's own VOL/MUTE functions.
The punch through function for this device is thus
switched off.
The universal function cannot be switched off for the
TV mode. If, as described in the previous section, you
have selected a different mode for the VOL/MUTE
universal function, you will not be able to switch off
the universal function for this mode either.
 Press the Setup button for approx. 3 seconds until
CODE SET appears in the display.
 Press  to select SYSTEM SET.
 Press O K . VOLUME SET will appear.
 Press O K again. The VOL/MUTE ALL menu is
displayed.
 Use the arrow  to select the
50