Symbols Used In This Manual; Device Description; Application; Accessories - Ecotap DC 150 Mode D'emploi

15.2 Symbols used in this manual and on the charging system
Symbol Meaning
Pay attention! Important instruction
Electrical hazard
For maintenance: first disconnect the installation from its power supply and
test it to make sure there is no voltage left, before engaging in any mainte-
nance activities
Wear special gloves.
Disconnect the electrical installation from its power supply
Reading this manual is mandatory

16. DEVICE DESCRIPTION

16.1 Application

This charging station is designed for intensive use.
Locations not suitable for installing the charging station:
- Small enclosed spaces < 8m3
- All grounds that can flood
- Loading/unloading quay
- Slope at an angle of more than 4%

16.2 Accessories

The following accessories are not included in the scope of delivery:
- Tools
- Foundation element
- Mounting bolts (M12)
- Fast-setting concrete
16.3 Safety features
- Lockable using a euro profile cylinder (half)
- Fuse holders / circuit breakers.
- 12/24 Volt control voltage
18. www.ecotap.nl
20/04/22