Evenflo REVOLIVE360 Mode D'emploi page 81

8. Push Base against vehicle seat
back. Tension LATCH/UAS Strap by
pulling on loop until snug, making
sure not to overtighten.
9. After tightening LATCH/UAS, secure
excess strap under the LockStrong.
10. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not fully
close (lock indicator still RED), open
the LockStrong and try loosening the
LATCH/UAS strap slightly.
LATCH/UAS (Rear-Facing and Forward-Facing)
Installing LATCH/UAS
81