Evenflo REVOLIVE360 Mode D'emploi page 63

Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
NEVER install this Car Seat using
a non-locking vehicle lap/shoulder
belt.
NOTE: Refer to your vehicle
Owner's Manual for information.
11. Pull the Tether Adjuster Strap to
tighten.
12. Install Seat Shell to Base (pg.
55), move Seat Shell to the
REAR-FACING
appropriate
FORWARD-FACING
based on the child's size (see pgs.
10 and 12), and lock into position.
13. Confirm that the seat is in a
locked position by checking that
the Rotation Lock Indicator is
GREEN.
Installing Lap/Shoulder Belt (Preferred Method)
or
position
63