Aikan MAX205BAR Mode D'emploi page 3

ENG
correct electric equipment will do the job better and
safer at the rate for which it was conceived
use the electric equipment if the switch cannot be
positioned to "off" and "on" position
equipment that cannot be controlled with the switch
is dangerous and must be repaired
plug from the power supply and/or battery before
making any adjustments, changing accessories or
storing the electric equipment
safety measures reduce the risk of starting the
electric equipment accidentally.
STORE ELECTRIC EQUIPMENTS.
Store electric equipments out of reach of children
►
and not allow the handling of electric equipments
to people unfamiliar with the tools or these
instructions Electric equipments are dangerous
►
in the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions that
may affect the operation of electric equipments
Electric equipments are repaired before use
►
when they are damaged
caused by poorly maintained electric equipments
Use electric equipments, accessories and tool
►
tips, etc. according to these instructions and in the
manner provided for the particular type of electric
equipment, taking into account the conditions
work and work to develop
equipment for applications other than those
intended could result in a dangerous situation
Please check your electric equipment serviced
►
by a Werku official repair service using only
®
identical replacement parts
safety of the electric equipment is maintained.
CHECK THE GOOD CONDITION OF THE
AIRLESS ELECTRIC EQUIPMENT.
Make sure that all the screws in the airless electric
►
equipment are perfectly tightened
or when the airless electric equipment has not
been used for a period, allow the airless electric
equipment to warm up by leaving it to run empty for
a few minutes, to ensure that all internal components
are perfectly lubricated
installed accessories are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the airless electric equipment is
►
firmly supported before using
is standing beneath you when using the airless
electric equipment in high areas
hands away from all moving parts of the airless
electric equipment.
►
Any electric
►
Remove the
►
Such preventive
►
Many accidents are
►
The use of the electric
►
This will ensure the
►
In cold climates
►
Make sure that the possible
►
Check that no one
►
Keep your
►
DURING THE OPERATION.
Do not Do not leave the airless electric equipment
►
operating without having it firmly fixed
it on when you are sure you have full control over
it Do not point the airless electric equipment at
►
anyone while in use
electric equipment will produce vibrations
screws may gradually come loose, and possibly
cause faults or accidents
from all moving parts of the airless electric equipment.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the airless electric equipment after use
be hot and cause burns
with may contain chemicals or toxic components
Avoid inhaling these substances or allowing
►
them to come into contact with your skin
PPE designed to prevent and protect against
incidents of this kind.
HIGH-PRESSURE HOSE SAFETY PRECAUTIONS.
Attention, danger of injury by injection!
►
and tear and kinks as well as usage that is not
appropriate to the purpose of the device can
cause leakages to form in the high-pressure hose
Liquid can be injected into the skin through a
►
leakage
►
thoroughly before they are used
any damaged high-pressure hose immediately
Never repair defective high-pressure hoses
►
yourself!
►
smallest bending radius is about 20 cm
not drive over the high-pressure hose
against sharp objects and edges
the high-pressure hose to move the device
not twist the high-pressure hose
high-pressure hose into solvents
cloth to wipe down the outside of the hose
the high-pressure hose in such a way as to ensure
that it cannot be tripped over
charging of spray guns and the high-pressure
hose is discharged through the high-pressure
hose For this reason the electric resistance
►
between the connections of the high-pressure
hose must be equal or lower than 197 kΩ/m.
AIRLESS GUN SAFETY PRECAUTIONS.
Be safety-conscious
►
regulations governing ventilation, fire prevention,
and operation must be observed
injury A high pressure stream produced by this
►
airless gun can pierce the skin and underlying
tissues, leading to serious injury and possible
amputation
3
English
When operating the airless
►
Keep your hands away
►
Some materials worked
►
High-pressure hoses must be checked
Avoid sharp bends and folds: the
Electrostatic
►
All local and national
►
Do not treat an injection injury as a
►
Only turn
►
The
►
It may
►
Use
►
Wear
►
Replace
►
Do
►
Protect
►
Never pull on
►
Do
►
Do not put the
►
Use only a wet
►
Lay
►
Hazard: Injection
►