Frequency.measurement; Temperature.measurement - Beta 1760/RMS Mode D'emploi

FREQUENCY MEASUREMENT
1 Set.the.function.switch.to.the.Hz.position.
2 Insert.the.black.test.lead.banana.plug.into.the.negative.(COM).jack.and.the.red.test.lead.banana.
plug.into.the.positive.Hz.jack.
3 Touch.the.test.probe.tips.to.the.circuit.under.test.
4 Read.the.frequency.in.the.display..The.digital.reading.will.indicate.the.proper.decimal.point,.
symbols.(kHz,.MHz).and.value.
TEMPERATURE MEASUREMENT
1 Set.the.function.switch.to.the.ºC.position.
2 Insert.the.Temperature.Probe.into.the.input.jacks,.making.sure.to.observe.the.correct.polarity.
3 Press.the.MODE.button.until."ºF.or.ºC".appears.in.the.display..
4 Touch.the.Temperature.Probe.head.to.the.part.whose.temperature.you.wish.to.measure..Keep.
the.probe.touching.the.part.under.test.until.the.reading.stabilizes.(about.30.seconds).
5 Read.the.temperature.in.the.display.
Note:
The temperature probe is fitted with a type K mini connector. A mini connector to banana connector
adaptor.is.supplied.for.connection.to.the.input.banana.jacks.