Handicare Coral Mode D'emploi page 7

Assembly
Coral commode/shower stools:
3002010030, 3002010130
1
1. Slide the arm support on the
straight part of the leg (2x).
4
4. Slide the frame of the
back support in the rear
pockets of the seat.
M A N U A L
2
2. Position the leg with arm support
(2x) on the seat. Make sure that all
pins of the seat fully protrude the leg
and the arm support.
5
5. Slide the base plate over the front legs.
Make sure that the rear pins of the seat
fully protrude the base plate. Push the
base plate onto the seat until all clickers
snap into place.
3
3. Make sure that the leg and arm
support are well fitted in the seat. Lay
this part on a table for easier
assembly of the back support.
6
6. Mount the safety lock (2x) on the
protruding pin. Make sure that both safety
locks are screwed on tightly.
English
7