Table des Matières
Publicité
EN Care & maintenance
PL Czyszczenie i konserwacja
EN
Care & maintenance
IMPORTANT: Turn off the power after Step 1 below before replacing the carbon filters.
01
Carbon filter replacement
Replace carbon filters every three months.
To change the carbon filters:
1. Press and hold the On/Off key for 4 seconds.
2. Turn off the mains power at the isolation switch.
3. Lift out the square glass panel, place it face down on a soft surface and remove the aluminium grease filters.
4. Change the carbon filter
5. Replace the grease filter and the glass panel. Turn on the mains power at the isolation switch.
3 MONTHS
2x Carbon filter, model: CARBFILT 50 available via the Customer Helpline - see end of Care & Maintenance section for details.
If the motor is off, and after the fan has been in operation for approximately 150 hours. The display will show and the
Timer will flash blue to advise you to replace the carbon filters. After replacing the filters, reset the alert by pressing
the Timer
icon.
WARNING: Always switch off the electrical supply before carrying out maintenance work on the hood. In the event
of a fault, contact Customer Services.
FR
RO Îngrijire și întreținere
> 4 seconds
180°
Entretien et maintenance
180°
1
2
1
2
45
Publicité
Table des Matières
