GoodHome bamia GHAGRE90 Mode D'emploi page 19

EN Use
PL Użytkowanie
EN
Controlling a GoodHome cooker hood remotely
IMPORTANT: This section is only applicable if you have purchased a GoodHome cooker hood.
The process for connecting the hood to the hob happens in three stages:
A) Configure the hob to transmit a radio frequency signal.
B) Configure the hood to receive this signal.
C) Lock the connectivity between the two appliances and complete the pairing process.
STAGE A
1. The induction hob must be switched on and showing the Home Screen display before proceeding.
2. Touch the Main Menu key
pairing sequence and transmit a radio frequency signal from the hob. Do not touch the Hood connection button on the hob yet!
Settings
IMPORTANT: To proceed with the connectivity operation, the hood must be switched off at the mains power switch.
Turn on the hood again and complete Stage B and C within two minutes. If connection is not successful, turn off the
hood again, wait for one minute and try again.
STAGE B
1. When the hood is first switched on, the control panel will blink white in Settings mode.
2. Touch the Fan Speed Increase icon and Fan Decrease icon together for two seconds on the hood control panel and both
icons will turn blue and the Automatic symbol "A" will appear in the display The hood is configured to receive the signal.
FR Utilisation
RO Utilizare
0
Level
on the Home Screen to take you to the Settings menu. Touch the Connect icon
Connect
How to connect to hood
Hood connection
19
to initiate the