Important Safeguards - Weston 33-1101-W Mode D'emploi

IMPORTANT SAFEGUARDS

Do not use appliance for other than intended purpose.
18.
Never operate the grinder unattended. Be safe. Disconnect the
19.
grinder from power source before leaving the work area.
Grinding blade is sharp. Handle carefully.
20.
CAUTION! In order to avoid a hazard due to inadvertent resetting of
21.
the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
Do not run grinder without meat in the head. Severe damage to the
22.
head and auger may occur.
Plug the Grinder into a standard 120 Volt, 60 Hz wall outlet.
23.
Be sure the Grinder is on a stable work surface. Be sure all the
24.
Grinder Feet are stable.
DO NOT attempt to grind bones or other hard items.
25.
DO NOT run Grinder without meat in the Head. Severe damage to
26.
the Head and Auger may occur.
WEAR EYE PROTECTION. Wear safety glasses. Everyday eye
27.
glasses are not safety glasses. Safety glasses conform to ANSI
Z87.1 requirements. Note: approved safety glasses have Z87
printed or stamped on them.
DO NOT attempt to operate the Grinder if the Grinder itself is cold.
28.
The Grinder temperature should be at least 45oF (7oC) before
beginning.
The Gear Housing and the Motor Cover may become HOT during
29.
operation. This is normal. DO NOT touch these parts during
operation or until they cool after use.
4
SAVE THESE INSTRUCTIONS