Check And Open Packaging; Check The Product; Connect Up The Product; Setting The Irrigation Flow / Drip Rate - Erbe 20325-001 Mode D'emploi

OBJ_DOKU-193666-002.fm Seite 13 Dienstag, 15. September 2015 2:56 14
3.3

Check and open packaging

Only use this product if the packaging is unopened and undam-
aged. If the packaging is opened or damaged, the product is no
longer sterile and must not be used.
Use aseptic techniques when removing the product from the
packaging!
3.4

Check the product

Check the product for damage before use.
If damaged, do not use this product!
3.5

Connect up the product

For rigid fluid containers: The ventilation flap on the puncturing
spike of the tubing set must be open.
To install the tubing set, please read the user manual of Erbe Ir-
rigation Pump EIP 2.
3.6

Setting the irrigation flow / drip rate

The required irrigation flow is set on the EIP 2 itself and/or via
the controller on the tubing.
13