C2AI KT20 Notice D'utilisation page 7

The window allowing the input of the password
can also be used to reset the KISTOCK
password, simply input 2 blank fields to unlock
the KISTOCK.
The password check can be temporary disabled
from the Tools/Administrator menu by users with
the appropriate administration rights.
STEP 2 : Recording configuration
This particular stage is a bit different from the
standard recording configuration window available
for the other classes of loggers.
A "Clock" bloc allows you to synchronise the PC
and the loggers. This synchronisation is not
necessary except in a Date/Hour start configuration
option.
The available start conditions for the KT-20 are :
Immediate : The recording is launched as
●
soon as the KISTOCK is programmed
By Date / Hour : The operator indicates the
●
date and hour at which the campaign will start.
On alarm condition : This option is only
available on KT-20 L / T loggers. The recording
will start as soon as an alarm condition is
raised.
The available stop conditions for the KT-20 are :
Full memory
●
Rollover
●
The KT-20 only need one recording interval, the
minimum interval time is 1 minute for the KT-20
G and 1 second for the KT-20 L/T.
STEP 3 : Recap of the configuration
The validation of the recording configuration can be
done after the recap window preview.
7