JUMO di eco Notice De Mise En Service page 37

Parameter Meaning
Alarm suppression time
An alarm is not considered to be an alarm for this period. The LED K1
flashes in the display. If an alarm is present for longer than
considered to be an alarm, the LED K1 lights up and the relay is switched in
accordance with the parameter
Switch-on delay after power-on
For the time-delayed switch-on of the alarm monitoring. No alarms are eval-
uated during this time, only probe errors.
Relay type
0: relay operates as a break contact in the event of an alarm
1: relay operates as a make contact in the event of an alarm
Response to over/underrange
0: relay drops out at once
1: relay pulls in at once
(see parameter ).
Value range
(factory-setting in bold)
0 to 60min
, then it is
0 to 60min
0, 1
0, 1
13