Setting The Instrument Functions (Parameter Level) - JUMO di eco Notice De Mise En Service

4.3 Setting the instrument functions (parameter level)

H
Time-out:
If no key is pressed for 60 seconds, the instrument automatically switches back to temperature display, see
Overview of operation on the front inside page.
The instrument functions and values are set at the parameter level.
h
Press for 3 seconds and
h
Set code 72 for accessing the parameter level using the
The longer the key is pressed, the faster the value will change.
h
Acknowledge with
parameter name and value appear alternately, e.g.
h
Use the and
h
Acknowledge settings with
h
Set the next parameter, see Overview of operation on the front inside page.
H
Switching parameters out of display:
The table below lists all the parameters for each instrument type.
Depending on the type designation on the nameplate, parameters that are not required are hidden.
will appear in alternation.
,
keys to set the value within the specified value range.
.
and keys.
.
11