JUMO di eco Notice De Mise En Service page 36

Indicator parameters
Parameter Meaning
Alarm value (limit for relay and LED)
A measured value is considered to be an alarm if
- present value is larger than alarm value
- has been continuously present for longer than configured under the alarm
suppression time
An alarm is reset if
- present value is smaller than the alarm value - ½ hysteresis.
Hysteresis
It is used to determine an alarm.
The hysteresis lies symmetrically about the limit value
Low alarm limit
, together with
value .
High alarm limit
, together with
value .
+ ½ hysteresis
.
, is used to limit the value range for the alarm
, is used to limit the value range for the alarm
Value range
(factory-setting in bold)
and
0.4 to 1.0 to 99.9°C/°F
.
-350 to -200 to +999°C/
°F
-350 to +500 to +999°C/
°F
to 0 to
12